Version Française sur mon blog: https://fcerbell.github.io

This project includes :
- The hardware design and build (Kicad)
- The firmware source and binaries (Arduino IDE)
- The 3D printed enclosure design source (FreeCAD)

I needed a small electronic load, I wanted to have one. Even the smallest are way too expensive for my usage and miss a lot of wished features. Thus, I specified high ratings and numerous features, way over my needs, even if I meet 50% of the specs, this will be more than my actual need....

Source Jekyll de mon blog
Jekyll sources for my blog

Hakeva (pronounce hae-key-va) means Hardware Key Value
(aka Hardware Redis, or hwredis)
...and also "rare" in Finnish

Be aware that this project will probably never reach a useful status. It helps me to learn FPGA configuration with Verilog
Designing and building such and electronic hardware, a firmware and a gateware is my new personal challenge....

Multiplatform-Distributed application framework
Micro-kernel based, everything as a module

Features¶

• Integrated memory leak detection for testing
• Advanced OOM behavior tests (using setrlimit and filling RAM) for testing
• Module manager with modules meta-data, onload/onunload auto calls and usage counter...

My packer configuration to build vagrant boxes

My puppet modules, mainly tested on and developped for Debian

Hardware :
The idea is to create a mini cluster with 15 raspberry pi connected to a single 16 port switch and to a single 5V power supply. It has to be as light as possible and transportable. Each node need to be switchable (on/off) easily and to have a minimal UI (LEDs connected to GPIO pins)....

My vagrant configuration to instanciate immediate clusters

Meta-project with subprojects
Verilog playground for FPGA (Altera/Intel Cyclone family)
- SDRAM
- FIFO
- UART
- ...