Project

General

Profile

Evolution #292

Use Active Low for control signals for better noise tolerance and ensure reset is active at powerup

Added by François Cerbelle 5 months ago. Updated 5 months ago.

Status:
Résolu
Priority:
Normal
Target version:
Start date:
01/07/2023
Due date:
01/09/2023
% Done:

100%

Estimated time:
2.00 h
Spent time:

Associated revisions

Revision 27:8fb3d1013aa8 (diff)
Added by François Cerbelle 5 months ago

Switched Reset control lines to active-low (Closes #292 @1h)...
- Renamed all *_Reset to *_Rst_n
- Renamed all *_Clock to *_Clk
- Updated the pin planner
- Updated the timing constraints in the SDC file

History

#1

Updated by François Cerbelle 5 months ago

  • Tracker changed from Evolution to Feature request
#2

Updated by François Cerbelle 5 months ago

  • Due date set to 01/20/2023
#3

Updated by François Cerbelle 5 months ago

  • Subject changed from Use Active Low for control signals for better noise tolerance to Use Active Low for control signals for better noise tolerance and ensure reset is active at powerup
#4

Updated by François Cerbelle 5 months ago

  • Due date deleted (01/20/2023)
#5

Updated by François Cerbelle 5 months ago

  • Status changed from Nouveau to En cours
#6

Updated by François Cerbelle 5 months ago

  • Tracker changed from Feature request to Evolution
#7

Updated by François Cerbelle 5 months ago

  • Status changed from En cours to Résolu
  • % Done changed from 0 to 100
#8

Updated by François Cerbelle 5 months ago

  • Status changed from Résolu to Fermé
#9

Updated by François Cerbelle 5 months ago

  • Status changed from Fermé to Résolu
#10

Updated by François Cerbelle 5 months ago

  • Due date set to 01/09/2023

Also available in: Atom PDF